Rockwell Hardness Tester

Approx. Rs 40,000 / SetGet Latest Price

Approx. Rs 43,200 / PieceGet Latest Price

• Suitable for Rockwell Tests.
• Manually operated.
• Preliminary Test Force: 98.07 N(10 kgf).
• Additional Test Force: 490.3, 882.6, 1373 N (50,90,140 kgf).
• Total Test Force: 588.4, 980.7, 1471 N (60,100,150 kgf).
• Test Force Selection by external dialing.
• Auto zero setting dial gauge.

Approx. Rs 53,000 / SetGet Latest Price

• Suitable for Rockwell Tests.
• Motorised for automatic operation cycle i.e Load/Dwell/Unload.
• Preliminary Test Force: 98.07 N(10 kgf)
• Additional Test Force : 490.3, 882.6, 1373 N (50,90,140 kgf).
• Total Test Force:588.4, 980.7, 1471 N (60,100,150 kgf).
• Test Force Selection by external dialing.
• Auto zero setting dial gauge.

Approx. Rs 1.5 Lakh / PieceGet Latest Price

RASNE-TS series machines are suitable for Rockwell supercial & Rockwell cum Brinell tests. These are motorized Digital Hardness tester having 4.3'' TFT High quality Color display with touch screen for easy hardness measurement.The results are displayed in 0.1 Rockwell units for more accurate measurement.

Operation: 

Various parameters of test can be set on setting screen on touch screen.

Such as a High/low limits, dwell time, auto/manual start, printer selection, scale selection etc. All data can verify on pre load screen.

Machine operation is very simple. The normal mode pre load bar follow the pre load ok position, As a Same Time status bar will indicate pre load condition.

Raise elevating screw slowly by the up push button continuously till pre load bar pre load ok position which will show CYCLE START indication at status bar. Now press CYCLE START button.

Loading/unloading cycle will be completed and hardness is shown on Result Screen with HIGH/OK/LOW indication. Lower down elevating screw. Screen will show normal mode for next cycle. Also when we required 'AUTO START' set AUTO MODE ON on setting screen system will set for Auto mode.

Then raise elevating screw slowly through pre load bar indication till ok position then it will start loading /unloading cycle automatically & hardness is shown on Result screen with HIGH/OK/LOW indication, which Indenter we are use which load we are selected and what was a dwell set in cycle.

FIE's new 'RASNE' series of Hardness Testing Machines come with much improved design & look with following major design changes. These models are provided with automatic working cycle and 4.3'' TFT High quality Color display with touch screen with 0.1 Rockwell resolution. This insures productivity with better accuracy.


Features
• Suitable for Rockwell tests.
• Manually operated.
• Test force selection by external dialing.
• Auto zero setting dial gauge.
• Motorized loading unloading system.
• 4.3" Touch screen display.
• Built-in Hardness converter.

Approx. Rs 1.8 Lakh / PieceGet Latest Price

Features
• Suitable for Rockwell tests.
• Manually operated.
• Test force selection by external dialing.
• Auto zero setting dial gauge.
• Motorized loading unloading system.
• 4.3" Touch screen display.
• Built-in Hardness converter.

RASNE-TS series machines are suitable for Rockwell supercial & Rockwell cum Brinell tests. These are motorized Digital Hardness tester having 4.3'' TFT High quality Color display with touch screen for easy hardness measurement.The results are displayed in 0.1 Rockwell units for more accurate measurement.

Various parameters of test can be set on setting screen on touch screen.

Such as a High/low limits, dwell time, auto/manual start, printer selection, scale selection etc. All data can verify on pre load screen.

Machine operation is very simple. The normal mode pre load bar follow the pre load ok position, As a Same Time status bar will indicate pre load condition.

Raise elevating screw slowly by the up push button continuously till pre load bar pre load ok position which will show CYCLE START indication at status bar. Now press CYCLE START button.

Loading/unloading cycle will be completed and hardness is shown on Result Screen with HIGH/OK/LOW indication. Lower down elevating screw. Screen will show normal mode for next cycle. Also when we required 'AUTO START' set AUTO MODE ON on setting screen system will set for Auto mode.

Then raise elevating screw slowly through pre load bar indication till ok position then it will start loading /unloading cycle automatically & hardness is shown on Result screen with HIGH/OK/LOW indication, which Indenter we are use which load we are selected and what was a dwell set in cycle.

FIE's new 'RASNE' series of Hardness Testing Machines come with much improved design & look with following major design changes. These models are provided with automatic working cycle and 4.3'' TFT High quality Color display with touch screen with 0.1 Rockwell resolution. This insures productivity with better accuracy.

Approx. Rs 1.8 Lakh / PieceGet Latest Price

RASN-TSFA series machines are suitable for Rockwell supercial & Rockwell cum Brinell tests.

These are motorized Digital Hardness tester having 4.3'' TFT High quality Color display with touch screen for easy hardness measurement. The results are displayed in 0.1 Rockwell units for more accurate measuremen

Various parameters of test can be set on setting screen on touch screen. Such as a High/low limits, dwell time, auto/manual start, printer selection, scale selection etc.

All data can verify on pre load screen.

Machine operation is very simple. After pressing CYCLE START elevating screw will be raised till pre-load position followed by dwell time & Cycle complete with hardness indication in HIGH/OK/LOW.

After hardness indication user can get a result print-out indicating date, time, hardness value, type of indenter & load applied.

Elevating screw will lowered automatically to its previous position

Hardness conversions can be done through smart hardness converter on Screen.

FIE's new 'RASNE-TSFA' series of Hardness Testing Machines come with much improved design & look with following major design changes.

These models are provided with automatic working cycle and 4.3'' TFT High quality Color display with touch screen with 0.1 Rockwell resolution & Built-in Thermal Printer.

This insures productivity with better accuracy.

Approx. Rs 40,000 / SetGet Latest Price

Product Description:
Saroj Make Rockwell Hardness Testing Machine Hardness Tester - SAROJ Hardness Testers, Model RAS, RAB-1, RAB-250, TWIN are manually operated. All these models are suitable for testing hardness of metals sand alloys of all kinds hard or soft, whether flat, round, or irregular shape. These testers are simple in design and easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for schools, laboratories, tool-rooms, inspection, heat treatment departments

Approx. Rs 1.75 Lakh / SetGet Latest Price

Digital Rockwell Hardness Testing Machine consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.
RASNE series machines are suitable for Rockwell, Rockwell superficial & Rockwell cum Brinell tests. These are motorized digital Hardness testers having LCD display for easy hardness measurement. The results are displayed in 0.1 Rockwell unit for more accurate measurement.
Operation :
Various parameters of test can be set on front panel by operation of key board and observing LCD display Viz high/low limits, dwell time, auto/manual start, printer selection, scale selection etc. All set data can be verified edited by pressing SCL key one after another.
Machine operation is very simple. The normal mode is a bar followed by "SET" indication. Raise elevating screw slowly through bar indication till "SET" position which will show "PRESS START" indication. Now press "START" button. Loading/unloading cycle will be completed and hardness is shown on LCD display with High/Good/Low indication. Lower down elevating screw. Panel will show normal mode for next test. Also when required 'AUTO START' on front panel by operation of key board & observing LCD Display then raise elevating screw slowly through bar indication till "SET" position then it will starts loading/unloading cycle automatically & hardness is shown on LCD Display with High/Good/Low indication.

Additional Information:

• Item Code: RASNE-3
• Delivery Time: EX-STOCK
• Packaging Details: WOODEN BOX PACKING

Approx. Rs 1.75 Lakh / SetGet Latest Price

• Suitable for Rockwell tests.
• Fully automatic Motorized operation.
• Touch screen display.
• With Built-in Thermal printer.
• Auto load & scale selections.
• Data Storage on USB.
• PC Software Optional
• Low cycle time.
• USB Connectivity.

Additional Information:

• Item Code: RASN-TSFA
• Delivery Time: Ex-stocks

Approx. Rs 1.75 Lakh / SetGet Latest Price

We are dedicatedly involved in providing an excellent quality array of Digital Rockwell Hardness Tester, for catering the various needs of our clients.
Other Details:
Rockwell and Digital Rockwell Hardness Tester consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value. RASN-ET series machines are suitable for Rockwell and Rockwell superficial tests. These are motorized digital Hardness testers having LCD display for easy hardness measuring. The results are display in 0.1 Rockwell unit for more accurate measurement.
Operation:
Various parameters of test can e set on front panel by operation of key board and observing LCD display Viz high / low limits, dwell time, auto / manual start, printer selection, scale selection etc. All set data can be verified / edited by pressing SCL key one after another
Machine operation is very simple. The normal mode is a bar followed by "SET" indication. Raise elevating screw slowly through bar indicator till "SET" position which will show "PRESS START" indication. Now press "START" button. Loading / unloading cycle will be completed and hardness is shown on LCD display with High/ Good / Low indication. Lower down elevating screw. Panel will show normal mode for next test
Technical Specifications:ModelUnitRASN (ET)Major LoadN (kgf)147.1, 294.2, 441.3, 588.4, 980.7, 1471 (15, 30, 45, 60, 100, 150)Minor LoadN (kgf)29, 42, 98.07
(3, 10)Max Test Heightmm230Depth of Throatmm133Net Wt. Approxkg.73M/c DimensionsmmL-450, W-175, H-6ModelRASNET-1TypeDigital Rockwell SuperficialOperation CycleAutomatic Load/Dwell/UnloadPreliminary Test Force28.42 N (3 kgf) and 98.07 N (10 kgf)Additional Test Force177.7, 264.8, 411.9, 490.3, 882.6, 1373 N (12, 27, 42, 50, 90, 140 kgf)Total Test Force147.1, 294.2, 441.3, 588.4, 980.7, 1471 N (15, 30, 45, 60, 100, 150 kgf)Test Force SelectionBy external dialingSet PositionWith LCD bar indicatorKey board entryThrough membrane switch for Scale, GO-NO GO & dwell time sectionResolution0.1 Rockwell or 0.1 Rockwell SuperficialOutputParallel output for connecting dot matrix Printer to get results indicating serial no. of tests, hardness scale, hardness value & high/good/low indication.OptionalSerial PC interface & windows Software

Approx. Rs 42,500 / SetGet Latest Price

• Manual load selection with automatic Zero setting dial gauge.
• Manual Operation.
• Diamond holder is guided in a ball cage, which enables testing of small pins having dia from 3.00 mm onwards

Approx. Rs 35,000 / SetGet Latest Price

• Fine make hardness testers model TRB & TRB-250 are manually operated. These models are designed and developed after years of experience in this field. All the models are manufactured under strict quality at all manufacturing stages.
• These models are suitable for testing hardness of metals and alloys of all kinds,. hard or soft, whether flat or round etc_ or of irregular shape. These Testers are simple rn design and easy to operate, still suite sensitive and accurate.
• These models strictly conform to iS 3804. BS 891 Part-I &IL ASTM-E-18 for Rockwell test and IS 2281-2005_ BS 240. ASTM-E-10 for Brinell test and IS 5073-1988_ ATM-E-18 for Rockwell Superficial test.

Approx. Rs 42,500 / SetGet Latest Price

Other Details:

Fine make hardness testers model TSM is manually operated_ These models are designed and developed after years of experience in this field. All the models are manufactured under strict quality at all manufacturing stages.

These models are suitable for testing hardness of metals and alloys of all kinds,. hard or soft, whether flat or round etc_ or of irregular shape. These Testers are simple rn design and easy to operate, still suite sensitive and accurate.

These models strictly conform to iS 3804. BS 891 Part-I &IL ASTM-E-18 for Rockwell test and IS 2281-2005_ BS 240. ASTM-E-10 for Brinell test and IS 5073-1988_ ATM-E-18 for Rockwell Superficial test.

TSM: This hardness tester is similar to TRB-250 machine in construction and with automatic weight selection. This is useful for carrying Rockwell and Rockwell Superficial Tests. The Rockwell Superficial method is useful for checking hardness of very thin sheets and surface hardness.

Approx. Rs 2.8 Lakh / PieceGet Latest Price

Hardness  Tester  TLRH-CURVE,  adopted  the  international  advanced  closed-loop  sensor  control technology, to achieve full automatic control and hardness testing process. The load system uses high- precision force value sensor and central controller to form a closed-loop loop to achieve full microsecond level tracking and control of the booster process. The measurement system uses high-precision displacement sensor with a hardness value resolution of 0.1 HR for accurate hardness results.

Additional Information:

• Item Code: TLRH-CURVE
• Delivery Time: EX-STOCK

Approx. Rs 1.1 Lakh / SetGet Latest Price